How YG Group Can Support Your PPWR Packaging Material Review

A customer preparing packaging for the EU market may ask:

“Is this label or tape PPWR compliant?”

For most projects, that question cannot be answered from one material specification alone.

The review should start with the complete packaging system: the main packaging material, label or tape construction, adhesive, coverage, intended use and recycling or reuse route.

YG Group can support this process by reviewing the selected material, providing available technical documents and samples, and discussing whether additional application testing or independent assessment may be needed.

Important: YG Group's material review supports the customer's packaging assessment. It does not replace the final legal or technical assessment of the complete package.

Quick Answer: What Can YG Group Support?

YG Group can help customers review PPWR-related packaging material questions in four areas:

The goal is to help the customer identify the right material information and the next technical step, rather than giving a generic “PPWR compliant” statement.

What Does PPWR Mean for Your Packaging Review?

The EU Packaging and Packaging Waste Regulation, or Regulation (EU) 2025/40, entered into force on 11 February 2025 and will generally apply from 12 August 2026. Some technical criteria, targets and detailed obligations follow later implementation dates.

PPWR covers packaging composition, recyclability, recycled content, labelling, packaging minimisation, reuse and extended producer responsibility.

For a packaging buyer, the practical question is not simply whether one label or tape is recyclable.

The more useful question is:

How does each component interact with the complete packaging system?

A PPWR-related review should therefore consider the full packaging construction rather than one component alone.

Why Labels, Adhesives and Tapes Matter

Labels and tapes may represent only a small part of the package, but they can still affect how the package is sorted, separated or processed after use.

Depending on the project, relevant questions may include:

What is the main packaging material?

PET, PE, PP, glass, paperboard and flexible packaging can require different review considerations.

What is the label construction?

Facestock, adhesive, ink, coating and label dimensions may all matter.

How much of the package is covered?

A small label and a large film label should not automatically be treated the same way.

Does the component remain with the package?

The answer can affect how the complete packaging structure is reviewed.

Release liners should normally be considered separately because they are often removed during converting or label application and do not remain with the finished consumer package.

YG Group supplies materials used in pressure-sensitive label and packaging structures, including film label materials, siliconized glassine paper and packing tape products. Each material still needs to be reviewed according to its actual application and waste route

How YG Group Supports Your Material Review

1. Review the Selected Product

The first step is to identify the exact product and construction.

Depending on the material and available documentation, YG Group can help provide or confirm information such as:

• Product structure and specifications
• Facestock, adhesive and liner construction
• Available TDS or SDS
• Material-composition information
• Relevant test reports or supplier documents
• Information needed for customer technical questionnaires

This information can support the customer's packaging technical file.

It should not be treated as a final declaration for the complete packaging system unless such a document specifically applies to the product and scope concerned.

2. Review the Actual Packaging Application

A TDS alone cannot show how one material will behave in every packaging system.

YG Group may therefore review factors such as:

Packaging Material → Label / Tape Construction → Coverage → Printing → Temperature → End-of-Life Route

For example, a PET bottle with a small label raises different questions from a paperboard carton sealed with packaging tape.

3. Prepare Samples and Discuss Testing

Where the available documents are not enough, the next step may include:

• Sample preparation
• Adhesion or application evaluation
• Comparison of candidate materials
• Review of customer-specific requirements
• Identification of missing technical information

YG Group operates a CNAS-accredited testing center, together with material-analysis and application-evaluation capabilities.

The appropriate test method and accredited scope still need to be confirmed for each individual project.

How the Review Process Works

Step 1: Send the Packaging Information

The customer provides the packaging structure, main substrate, intended application, food-contact status, target market and requested documents.

Step 2: Review the Selected Material

YG Group checks the product model, material construction, intended use and supporting documents.

Step 3: Identify Information Gaps

The team then identifies any remaining information gaps and whether samples, additional documents or further testing may be needed.

Step 4: Confirm the Support Scope

YG Group confirms what product information can be provided, whether samples can be prepared and which further technical discussions may be required.

This process gives the customer a more useful starting point than a general statement about “PPWR compliance.”

What Changes with Different Packaging Materials?

The main packaging material changes the questions that should be asked during label, adhesive and tape selection.

The points below describe what YG Group may review. They do not represent a final recyclability conclusion or a complete PPWR solution.

PET Packaging

For PET packaging, the review may consider the label facestock, adhesive, label coverage and how the label may separate during the intended recycling process.

A large film label, a small paper label and a full-body label may interact differently with sorting and recycling.

PE and PP Packaging

For PE or PP packaging, the review may consider the container material, surface energy, label facestock, adhesive, coverage and end-use conditions. Adhesion performance and recycling considerations should be reviewed separately.

Glass Packaging

For glass packaging, the review may consider whether the container is single-use or returnable, together with the label facestock, adhesive, coverage and any customer-specified washing or removal requirements.

Paper and Cardboard Packaging

For paper or cardboard packaging, the review may consider the carton coating, label facestock, adhesive quantity, tape coverage and intended fibre-recovery process. A paper appearance alone does not confirm compatibility with paper recycling.

Flexible Packaging

For flexible packaging, the review may consider the main film structure, label film, adhesive, printing or lamination process, barrier requirements and intended recycling route. Customers should provide the complete construction rather than only the outer material.

YG Group Technical Support

YG Group's role is primarily to provide material-level information and technical support.

Because YG Group supplies connected packaging components such as label facestocks, adhesives, release liners and packaging tapes, customers can discuss several parts of the packaging structure with one material supplier.

For applicable projects, YG Group can combine:

Product Information + Material Analysis + Application Evaluation + Sample Support

This can help customers narrow material options and identify which questions still need to be addressed in the final packaging assessment.

YG Group does not automatically certify a complete package as PPWR compliant simply because one component has been supplied or tested.

What Information Should You Send YG Group?

Instead of writing only:

“We need a PPWR-compliant label.”

send the following project information:

• Main packaging material and structure
• Label, adhesive or tape application
• Label dimensions and approximate coverage
• Printing and converting method
• Food-contact status, if applicable
• Whether the component remains with the finished package
• Intended recycling or reuse route
• Target EU market
• Required technical documents
• Required size and estimated volume

A package photo, technical drawing, current TDS or physical sample can make the review more useful.

Frequently Asked Questions

When does the EU PPWR apply?

Regulation (EU) 2025/40 generally applies from 12 August 2026. Some detailed technical criteria, targets and obligations follow later implementation dates.

Can labels and adhesives affect a PPWR packaging review?

Yes. Labels and adhesives may affect sorting, separation and recycling. Their relevance depends on the complete packaging structure and intended recycling process.

Can YG Group confirm that one label is PPWR compliant for every package?

No. The review depends on the substrate, label construction, adhesive, coverage, application and recycling route. The final package should be assessed using the applicable method.

What documents may YG Group provide?

Depending on the product, YG Group may provide specifications, TDS or SDS files, material information, test reports, supplier declarations, samples and technical-questionnaire support.

Does YG Group perform the final PPWR compliance assessment?

No. YG Group can support material and document reviews. The final assessment depends on the complete packaging system and the responsibilities of the relevant economic operators.

Does YG Group handle EPR registration?

No. YG Group does not normally register or pay EPR fees on behalf of customers. It may provide relevant product information, while customers should confirm their obligations according to their role and sales route in each EU Member State.

Discuss Your PPWR Packaging Requirements

Send YG Group your packaging structure, application requirements and requested documents. Our team will review the selected material and confirm what product information, documents, samples or further technical discussions can support your project.

Official References

• Regulation (EU) 2025/40 on packaging and packaging waste
• European Commission: Packaging Waste and PPWR Overview
• European Commission: PPWR Frequently Asked Questions
• Commission Notice C/2026/3084: Guidance Document for Regulation (EU) 2025/40

Regulatory information last reviewed: October 2026

This article provides general product and technical information and does not constitute legal advice. PPWR obligations should be confirmed according to the complete packaging structure, economic-operator role, target market and applicable implementation date.